Recall Description
The fault handling strategy of the Engine Control Module (ECM) or PCM software in the affected vehicles does not remove positive torque requests from the engine controller if the CAN-C bus stops communicating while the cruise control is requesting positive torque.

Remedy
Inspect the software level of the ECM/PCM and, if necessary, perform a software flash on the ECM/PCM of affected vehicles to improve the fault handling so that if the CAN-C bus does stop communicating any active torque requests will be cleared

This recall was open as of the date/time that this report was generated. For more information, or to find out if the recall has been closed, please contact RAM or visit Ram's website.

Recall Description
The Brake Transmission Shift Interlock (BTSI) locking pin may become stuck in the open position. A BTSI locking pin stuck in the open position may allow the transmission to be shifted out of PARK and to or from any gear position without depression of the brake pedal and/or without the key in the ignition, if a key is applicable.

Remedy
For 2013-2017 model year; Inspect the Brake Transmission Shift Interlock (BTSI) operation and replace if necessary. The Body Control Module (BCM) software will also be updated. For 2009-2012 model year; replace the BTSI, BCM software update not applicable.

This recall was open as of the date/time that this report was generated. For more information, or to find out if the recall has been closed, please contact RAM or visit Ram's website.

Recall Description
THE OCCUPANT RESTRAINT CONTROL MODULE MAY ACTIVATE A DIAGNOSTIC TROUBLE CODE (DTC) DUE TO EXTERNAL STIMULUS WHICH DISABLES ITS ABILITY TO SENSE VEHICLE ROLLOVER EVENTS. WHEN THE DTC IS SET, AIRBAG AND SEAT BELT PRETENSIONER DEPLOYMENT BASED ON ROLLOVER SENSING IS DISABLED FOR THE IGNITION CYCLE IN WHICH THE DTC WAS SET.

Remedy
THE ORC MODULE ON INVOLVED VEHICLES MUST BE REPROGRAMMED WITH NEW SOFTWARE.

This recall was open as of the date/time that this report was generated. For more information, or to find out if the recall has been closed, please contact RAM or visit Ram's website.